I recently faced a similar issue with my Ring doorbell. Even after charging for several hours, the blue light kept blinking and not connecting. This situation can be frustrating and worrisome, especially when you rely on Ring Doorbell for your home security.
In this blog post, I will share with you the solutions that helped me fix my Ring doorbell’s blue light blinking issue. So, whether you’re a new Ring Doorbell user or have been using it for a while, keep reading to learn how to fix your Ring Doorbell flashing blue light and connecting problem.
Why is my Ring doorbell flashing blue?
The blue LED on your Ring Doorbell tells you everything you need to know about the status of your device. It can flash in a variety of blue and white patterns, with every different pattern conveying a separate message.
It is important to understand the different messages that your Ring Doorbell can convey through light to ensure that the device is functioning properly.
1. If the blue light turns on and off at 1-second intervals that means the Ring Doorbell is starting up or rebooting.
2. The blue light blinks and moves upward. Your Ring doorbell is connecting to WiFi during the setup process.
3. The blue light will blink 4 times and then a white circle will turn on. Your Ring doorbell is now set up and ready to use.
4. The top half of the blue light blinks. The WiFi password entered in the Ring app during setup is incorrect. On your Ring Doorbell Pro, this may mean that the first charge of the built-in battery has been completed.
5. A short, rapid blue flash followed by a spinning white circle. Your Ring doorbell has been successfully returned to factory default settings.
6. The blue light rotates if you press the ring doorbell button.
7. Solid blue Two-way audio is currently in use.
Also read, What Do 4 Red Lights on Ring Doorbell Mean?
Here are some steps to fix your Ring Doorbell Flashing Blue and Not Connecting
1. Check your Ring doorbell’s internet connection
The first troubleshooting step is to check your Ring Doorbell’s internet connection. Ring devices installed too far from the router are more likely to malfunction and cause a flashing blue light.
You can check your Internet connection through the Ring app installed on your smartphone. You also need to make sure your connection is working properly.
2. Reconnect your device
One tip to fix the Ring Doorbell flashing blue and connecting issue is to reconnect the device to WiFi or change the WiFi network in the Ring app.
To do this you must follow these steps:
- Open the Ring app on your smartphone or tablet.
- Tap the “Devices” icon in the bottom menu.
- Select the blue flashing Ring doorbell.
- Tap “Device Status,” then tap “Reconnect to WiFi” or “Change WiFi Network.”
- Follow the instructions to reconnect your device to WiFi or change WiFi networks.
When you reconnect to WiFi or switch networks, the connection between your Ring Doorbell and WiFi network is essentially “refreshed.” This can sometimes fix the problem.
You’ll be asked to enter your Wi-Fi network password into the app to complete this process, so it’s a good idea to keep it handy.
3. Try resetting your Ring doorbell
In most cases, restarting your Ring Doorbell can fix minor bugs and issues. Resetting your Ring Doorbell to factory settings may also help you fix the blue light blinking issue when you don’t want it to.
To reset your Ring doorbell, follow these steps:
- Look for the orange button on the back of your Ring doorbell.
- Press and hold the button for 20 seconds.
- Release the button and wait for the Ring Doorbell to restart.
Once your Ring Doorbell restarts, it may take a few minutes for your device to reconnect to the app.
Typically, a blinking blue light means your Ring Doorbell is connecting to a network during setup, has been set up successfully, or is currently charging.
However, a blinking blue light may also indicate that the device is booting up, the doorbell has been reset, or a front button has been pressed. The blue LED light pattern varies between Ring Doorbell models.
Why is the Ring Doorbell flashing blue and not charging?
A common technical issue that prevents your device from updating its battery level in the Ring app is what causes your Ring Doorbell to flash blue even when fully charged. This can happen if the app’s connection to your Ring doorbell is interrupted or if a bug occurs in the app itself.
When this issue occurs, the app may display a notification that your device needs to be charged, and your Ring Doorbell may continue to glow blue even after the battery is fully charged.
How to Fix the Ring Doorbell flashing blue and not charging?
The simplest way to fix the “blue light blinking but not charging” issue is to press the doorbell button to trigger a test event in the Ring app and then check the device status screen to check the battery percentage. Updated correctly.